Shop

Pump RPM Meter

The Pump RPM monitor system monitors the speed of the solder pump. If a problem arises that affects the speed of the impellor, the sensing system will detect this change, stop the pump running and display an error message.

카테고리:

설명

Principle of Operation

  1. The type of sensor that is fitted to this PCB is a “Self Calibrating Hall Effect Fine Tooth Gear Sensor”.
  2. The output from this sensor is a current pulse, which is then converted to a voltage on the head controller. This then compared to a reference voltage. The system can then detect open circuit, short circuit and pulse conditions.
  3. The time between each revolution of the pulley is measured by the hardware, and then this time is used to calculate the pump RPM.
  4. Because there is only one pulse per pulley revolution, the sensor is only accurate to within ±2rpm. For this reason the sensor is not used to display the pump running rpm, but only informs the system if there is a pump speed error.

Please fill in your details below to be taken to our brochure downloads page.

    Which country are you from?

    Which state are you from?*

    Pillarhouse International Ltd will use the information you provide on this form to be in touch with you and to provide updates and marketing. Please let us know all the ways you would like to hear from us:

    EmailDirect MailCustomised Online Advertising

    관심 상품…